1. Calibrate the pH electrode and dissolved oxygen electrode.
2. Sterilize the tank. Add the culture medium to the tank as needed, and seal it as required. For small fermentation tanks (5L), the tank can be sterilized in a large autoclave (115℃, 30 minutes); large fermentation tanks (10L and above) are sterilized by steam (121℃, 30min).
3. After the tank is cooled, place it on the fermentation table and install it well; turn on the cooling water, turn on the air pump power, connect the ventilation pipe to start ventilation, adjust the air intake knob to make the ventilation volume appropriate, and keep the tank pressure at 0.05MPa; set the temperature, pH, stirring speed, etc., and calibrate the slope of the dissolved oxygen electrode at a certain speed and ventilation volume, with a value of 100%
4. After the temperature is stable and all parameters are correct, connect the pre-shaken seeds, start the fermentation timing, and start recording various parameters.
5. After fermentation is completed, clean the tank and electrodes, insert the pH electrode into a conical flask with 3M potassium chloride for standby use, cover the probe of the dissolved oxygen electrode with a protective cover and keep it for future use.

